|Product name||Boxing Ring|
|Material||Heavy-Guage Structural Steel|
|Key word||Competition Boxing Ring|
|Delivery Time||10-15 days|
The International Boxing Federation (AIBA) stipulates that the maximum boxing ring for international official competitions such as international boxing championships, Olympic boxing matches, and World Cup boxing matches shall not exceed 6.10 meters square. The inner ring of the boxing ring for a general competition can be between 4.90 and 6.10 meters square, depending on the specific situation. There must be 5 ropes around the ring, each rope is 0.03 meters in diameter and packed with soft materials, and the rope at the bottom should be 0.3 meters above the table. The uprights of the ring must be made of metal materials with a diameter of no more than 0.07m, and the height of the post must not be lower than 1.47m from the ring table, and must be constructed in accordance with the rules of the referee council. The distance does not exceed 0.4 meters, one side corner is designated as the blue square, and its opposite corner is designated as the red square.
. This step is only used by doctors outside the ring and the referee on the ring. Another function of this step is to avoid any contact between the two sides of the competition. There are 5 to 7 cm thick and 20 cm wide soft pads at the four corners of the stage, which are divided into red and blue. Generally, the red pad is located on the left of the referee’s bench, which represents the red corner. Put blue pads on the opposite corner, representing the blue corner, and white soft pads on the other two corners, which are neutral corners. The plastic bag at the neutral corner is used to store the hemostatic cotton balls and gauze used by the referees on the stage. Each rope is wrapped in a soft, smooth material that prevents athletes from chafing. There will be a 50cm excess outside the ring to prevent the athlete from falling off the ring.